Trituradora de Impacto MIC de Eje Horizontal
Caracteristicas:
Tiene un patente en EE.UU.
Tiene tres a cuatro filas de barras de soplado.
Apertura de alimentación extra grande.
Montaje del rotor equipado con dispositivo antideslizante.
Martillos con contrapeso equilibrado.
Eje Moly de cromo.
Cortinas duales ajustables.
Apertura de la Campana Hidráulica.
Rodamiento de 150mm.
Control de ajuste automático.
Canal de alimentación de 45 grados con revestimientos reemplazables.
Marco Principal Sólido con tratamiento térmico.
Specifications
| Type | Working Diameter of Rotor (in/mm) | Effective Width of Rotor (in/mm) | Feed Opening LxW (in/mm) | Power (HP/kW) | Weight (lbs/kg) |
|---|---|---|---|---|---|
| MIC102092 | 40 / 1,020 | 36 / 914 | 36x31 / 930x800 | 75-100 / 55-75 | 22,660 / 10,300 |
| MIC102115 | 40 / 1,020 | 45 / 1,143 | 45x31 / 1,160x800 | 120-150 / 90-110 | 25,300 / 11,500 |
| MIC102152 | 40 / 1,020 | 60 / 1,524 | 60x31 / 1,540x800 | 150-175 / 110-132 | 29,370 / 13,350 |
| MIC133076 | 52 / 1,330 | 30 / 762 | 30x42 / 778x1,065 | 75-100 / 55-75 | 25,080 / 11,400 |
| MIC133092 | 52 / 1,330 | 36 914 | 36x42 / 930x1,065 | 120-150 / 90-110 | 30,580 / 13,900 |
| MIC133115 | 52 / 1,330 | 45 / 1,143 | 45x42 / 1,160x1,065 | 175-215 / 132-160 | 35,200 / 16,000 |
| MIC133152 | 52 / 1,330 | 60 / 1,524 | 60x42 / 1,540x1,065 | 250-300 / 185-220 | 42,900 / 19,500 |
| MIC133184 | 52 / 1,330 | 72 / 1,848 | 73x42 / 1,844x1,065 | 250-300 / 185-220 | 48,400 / 22,000 |
Capacity
| Type | TPH @ 3/4in / 19mm | TPH @ 1in / 25mm | TPH @ 1 1/2 / 38mm | TPH @ 2in / 51mm | TPH @ 2 1/2in / 63mm | TPH @ 3in / 76mm |
|---|---|---|---|---|---|---|
| MIC102092 | 60 | 80 | 94 | 110 | 120 | 135 |
| MIC102115 | 75 | 100 | 120 | 137 | 150 | 170 |
| MIC102152 | 95 | 116 | 145 | 160 | 186 | 215 |
| MIC133076 | 76 | 102 | 121 | 140 | 152 | 173 |
| MIC133092 | 92 | 124 | 145 | 169 | 184 | 209 |
| MIC133115 | 116 | 155 | 184 | 211 | 230 | 261 |
| MIC133152 | 193 | 254 | 303 | 344 | 382 | 422 |
| MIC133184 | 250 | 330 | 394 | 448 | 496 | 548 |
Capacity based on continuous regulated feed of clean, dry limestone of normal hardness with a bulk density of 1.6 ton/m3. Capacity may vary with the size and nature of the rock and the working conditions of the plant.
| Grading of Size (Pass-Through Percentage) | ||||
|---|---|---|---|---|
| Size (inch/mm) | 24m/s | 27m/s | 30m/s | 34m/s |
| 3”(76) | 94 | 97 | 100 | 100 |
| 2”(51) | 91 | 94 | 97 | 99 |
| 1-1/2”(38) | 85 | 89 | 93 | 97 |
| 1”(25.4) | 67 | 73 | 78 | 86 |
| 3/4”(19.1) | 48 | 56 | 63 | 73 |
| 1/2”(12.7) | 37 | 43 | 50 | 60 |
| 3/8”(9.5) | 29 | 33 | 38 | 48 |
| 4M(4.8) | 19 | 21 | 24 | 32 |
| 8M(2.4) | 13 | 15 | 17 | 22 |
| 16M(1.2) | 9 | 10 | 12 | 17 |
| 30M(0.6) | 6 | 7 | 9 | 13 |
| 50M(0.3) | 4 | 5 | 6 | 10 |
| 100M(0.15) | 3 | 3.5 | 5.5 | 8 |
| 200M(0.08) | 2 | 2.5 | 4 | 6 |
Capacity based on continuous regulated feed of clean, dry limestone of normal hardness with a bulk density of 1.6 ton/m3. Capacity may vary +/- 25% with the size and nature of the rock and the working conditions of the plant.
All parameters are for reference only & subject to change without notice.
Approx. Dimension
| Type | A | B | C | D | E | F | G | H | I |
|---|---|---|---|---|---|---|---|---|---|
| MIC102092 | 800 | 930 | 1493 | 2400 | 509 | 1525 | 2210 | 1790 | 2055 |
| MIC102115 | 800 | 1160 | 1488 | 2382 | 509 | 1755 | 2430 | 1790 | 2055 |
| MIC102152 | 800 | 1540 | 1507 | 2355 | 509 | 2135 | 2750 | 1790 | 2055 |
| MIC133076 | 1059 | 778 | 1851 | 2944 | 679 | 1372 | 2050 | 2200 | 2676 |
| MIC133092 | 1065 | 930 | 1851 | 2928 | 679 | 1524 | 2210 | 2200 | 2686 |
| MIC133115 | 1065 | 1160 | 1851 | 2944 | 679 | 1754 | 2430 | 2200 | 2686 |
| MIC133152 | 1142 | 1540 | 1890 | 2928 | 679 | 2134 | 2830 | 2200 | 2676 |
| MIC133184 | 1065 | 1844 | 1851 | 2927 | 679 | 2438 | 3130 | 2200 | 2676 |
All parameters are for reference only & subject to change without notice.
Profile Construction
Size Distribution
